Active Directory (AD)
To install AD simple follow these steps:
Step 1
Open Server Manager and click on Roles > Add Roles link, and proceed with the next
Step 2
Select Server Roles Active Directory Domain Services, and then click Next.
Step 3
Click Next
Step 5
When finished, simply close.
Step 6
Once finished, on the Server Manager, follow the Active Directory Domain Services link, which will activate DCPROMO or enter the command from run manually.
Step 7
In the Operating System Compatibility window, click Next.
Step 8
In Deployment Configuration window, select "Create a new domain in a new forest and click Next.
Step 9
Chose the name for the new domain. Here make sure you enter the domain name you want correctly because renaming domains is not an easy task.
Do NOT use a single name domain names such as "mydomain" or similar.
You MUST chose a full domain name such as "mydomain.local" or "mydomain.com". Click Next
Step 10
Select forest function level. Windows 2000 mode is the default, and it allows the addition of Windows 2000, Windows Server 2003 and Windows Server 2008 Domain Controllers to the forest you're creating. If You You're not planning to have older version of the Windows in the forest, chose Windows server 2008.
Step 11
The wizard will check if DNS is properly configured on the local network. If no DNS server has been configured, the wizard will offer to automatically install DNS on the server.
Step 12
The first DC in a forest must also be a Global Catalog, and cannot be a Read Only Domain controller.
Step 13
At this time You might get an error if the server has dynamically configure IP Address.
If this is the case, please give the static IP address for the server.
( Also You will get this warning if the IPv6 is turned on and not configured but You can ignore the warning or turn it off.)
Step 14
Warning about DNS delegation might be generated since no DNS has been configured yet, so you can ignore the message and proceed: Yes.
Step 15
Setup AD database, log files and SYSVOL folder. You can leave this as default, Next
Step 16
Enter the Recovery Mode password for the Active Directory. Password should be complex and at least 7 characters long. Write it down and store it in a locker, Next.
Step 17
After clicking Next on the summary screen, the wizard will create the Active Directory domain.
Step 18
When finished, you will need to press Finish and reboot your
computer
That's it.Active Directory Users and Computers, or Groups, examine the Event Logs, services and folders and shares that have been created.
Thanks By Anas Amin
To install Active Directory on
a server that runs Windows Server 2008 or Windows
Server 2008 R2 and server 2012 operating systems.
we can use Active Directory Domain
Services Installation Wizard or Dcpromo.exe.To install AD simple follow these steps:
Step 1
Open Server Manager and click on Roles > Add Roles link, and proceed with the next
Select Server Roles Active Directory Domain Services, and then click Next.
Step 3
Click Next
When finished, simply close.
Step 5
When finished, simply close.
Step 6
Once finished, on the Server Manager, follow the Active Directory Domain Services link, which will activate DCPROMO or enter the command from run manually.
In the Operating System Compatibility window, click Next.
Step 8
In Deployment Configuration window, select "Create a new domain in a new forest and click Next.
Step 9
Chose the name for the new domain. Here make sure you enter the domain name you want correctly because renaming domains is not an easy task.
Do NOT use a single name domain names such as "mydomain" or similar.
You MUST chose a full domain name such as "mydomain.local" or "mydomain.com". Click Next
Step 10
Select forest function level. Windows 2000 mode is the default, and it allows the addition of Windows 2000, Windows Server 2003 and Windows Server 2008 Domain Controllers to the forest you're creating. If You You're not planning to have older version of the Windows in the forest, chose Windows server 2008.
Step 11
The wizard will check if DNS is properly configured on the local network. If no DNS server has been configured, the wizard will offer to automatically install DNS on the server.
Step 12
The first DC in a forest must also be a Global Catalog, and cannot be a Read Only Domain controller.
Step 13
At this time You might get an error if the server has dynamically configure IP Address.
If this is the case, please give the static IP address for the server.
( Also You will get this warning if the IPv6 is turned on and not configured but You can ignore the warning or turn it off.)
Step 14
Warning about DNS delegation might be generated since no DNS has been configured yet, so you can ignore the message and proceed: Yes.
Step 15
Setup AD database, log files and SYSVOL folder. You can leave this as default, Next
Step 16
Enter the Recovery Mode password for the Active Directory. Password should be complex and at least 7 characters long. Write it down and store it in a locker, Next.
Step 17
After clicking Next on the summary screen, the wizard will create the Active Directory domain.
Step 18
That's it.Active Directory Users and Computers, or Groups, examine the Event Logs, services and folders and shares that have been created.
Thanks By Anas Amin
Show Konversi KodeHide Konversi Kode Show EmoticonHide Emoticon